Yes, only Two models though the PF12 and PF14 are suitable for Gravity feed

• Part of the Diesepak range is the 200L Low Profile model SQDN200L-X1 • The Tank is fitted with brass female inserts in the bottom specifically designed for tray mounting • All other Dieselpaks including the 800L can be mounted by Heavy Duty ratchet straps • For the 1000L capacity Dieselpak we have a 033-999-KIT … Continued

• UV Stabilized Poly Tank specifically designed to store and transfer Diesel • A High Quality self-priming Vane pump. Auto shut off gun with stainless steel swivel adaptor, 4m of 19mm ID delivery hose, 4m wiring loom with Alligator clips and an internal suction filter • Standard flow rate of 40L/Min with optional higher flow … Continued

Baffling reduces the surge of fluids inside the tank.

The Selecta Polytuff Grey Tanks are suitable for Diesel. The tanks are UV Stabilized and are made from a specific Polyethylene for Diesel storage. They are available from 100L to 2200L capacities. Warning- Refer to Vehicle or tractor manufacturer’s instructions for appropriate load and towing limits and fitting positions. Never fill the spray tank capacity … Continued

The Silvan Polytuff Red Tanks are suitable for all Ag Chemicals & water. The tanks are UV Stabilized and are made from Polyethylene. They are available from 14L to 2200L capacities. Never, under any circumstances enter the tank. Warning- Refer to Vehicle or tractor manufacturer’s instructions for appropriate load and towing limits and fitting positions. … Continued

• For AG chemicals, the standard Santoprene valves are suitable for most applications • For special applications, different Viton valves and diaphragms may be required • Whenever selecting a pump, you should always refer to a chemical compatibility chart (refer to Silvan customer service on 1300 SILVAN to match the chemical to be used with … Continued

Generally a 20, 50 or 70 Litre spray tanks will be ok, BUT Warning: Refer to Vehicle or ATV manufacturer’s instructions for appropriate load and towing limits and fitting positions. Never fill the spray tank capacity to exceed the vehicle or ATV manufacturer’s specified safe load carrying capacities. Note: 1 Litre of water = 1kg.

• Both the Utepak and Trukpak sprayers are supplied with 6m of 10mm ID chemical resistant hose, PA series High Quality spray gun with 500mm extension lance with flat fan nozzle • The UV Stabilized Polytuff Tank has in built carry handles and inserts in the bottom for mounting, spill proof lid plus basket and … Continued

It is supplied so it can attach the delivery hose to the on/off switch bracket. This allows the hose not to be pulled too hard and breaking the delivery elbow.

• Now fitted with Aquatec 12 volt pumps • On/off switch • 6m of 8mm ID chemical resistant delivery hose • High Quality Spotjet spray pistol with 600mm Stainless Steel Lance and an adjustable nozzle • For easy connection to your 12 volt power source we have also included a 3mtr wiring loom with Alligator … Continued

Nylon Roller pumps can be used for high pressure washing, water transfer and Herbicide Spraying. Not suitable for corrosive chemicals. Note: When pump being stored must lubricate inner housing and rollers with Gear oil or Engine Oil. Leave oil in pump while not in use. For re-use clean and wash out oil before use.